|
Ventilate Damp, Musty Basements
/ Improve Indoor Air Quality
Many homes have damp basements that are stale, musty or
smelly because of seasonal water issues, sump pits,
floor drains or general lack of air exchange. The
XCHANGER Basement Fan is the economical and simple
way to automatically ventilate your basement to
eliminate basement odors and reduce humidity.
|
Also use
the XchangeR™
to:
-
Exhaust musty air or air contaminated by wood off-gassing or radon
-
Supply fresh make up air in tight homes or for stoves and fireplaces
-
Position one fan in each direction for balanced fresh air exchange
-
Ventilate hot garages, storage areas and workshops
-
Keep cabins and lake homes fresh
-
Dilute basement radon levels
|
|
|
|
Easily flip ONE or BOTH fans to have them*:
-
Exhaust
musty air or air contaminated by wood
off-gassing or radon
-
Supply
fresh make up air in tight homes or for
stoves and fireplaces
- Position one fan in each
direction for balanced
fresh air exchange
* All three orientations exceed ASHRAE
62.2-2007
Ventilation Air Requirements
|
 |
|
Features of the X2D and
X2R:
- Ultra quiet dual fans for exhaust,
supply or balanced air exchange
- Simple
plug-in electrical (6' cords) and
very low power use
- Installs through
rim joist of 16" on center or
greater floor joists or through wall
|
|
|
|
X2D
|
|
X2R
|
|
|
|
|
|
X2D includes the fans and
hood all in one compact unit.
Includes dehumidistat control and
magnetic draft stops to prevent unwanted air from entering your
home. Install X2D
through a 12 ¼ x 5 ¼ inch opening in
a basement rim joist or any outside
wall. Plug XchangeR fans into
dehumidistat control and plug
control into standard outlet.
|
 |
Use X2R in
applications where outside hood must
be located in a different room than
the fans are installed in. Hang X2R
from floor joist / truss or secure
to wall. Install hood through
13 3/4"
x 6 1/2" oval opening utilizing
template and duct 6” flex
to X2R collars on fan housing. The
X2R includes magnetic draft stops to prevent unwanted air from entering your
home. It does not include a dehumidistat control so
that it can be paired with the type
of control that best fits the
application.
|
|
X2D Unique
Features:
|
X2R Unique
Features:
-
Hood separate from fans for
installation flexibility
-
Fan assembly mounts from floor
joist / truss or on wall in any orientation for ease of
installation and flexibility
-
Magnetic draft stops prevent unwanted air from entering your
home
|
|
X2D
Accessories
|
X2R
Accessories
-
DH2P Dehumidistat Control
-
BD-6 6" Spring Return Back-draft
Damper
-
DT2-6 6" Duct Take-Off
-
SCP Speed Control
-
SWR Switch-It Wireless Outlet
|
For less than the cost of a portable
dehumidifier and at a fraction of the operating
expense, reduce humidity levels and eliminate the
musty smell of basement mold by installing a
Tjernlund XCHANGER basement fan.
|
